Direct Download Altair HWSolvers 2018.0.1 Hotfix

Hits: 14


Altair HWSolvers 2018.0.1 Hotfix | 632.6 mb
Altair has released an update to HyperWorks Solvers 2018, is a collection of finite element and multibody dynamics solvers for structural, fluid-dynamics and systems simulation. This hotfix contains key bug-fixes.

Altair HyperWorks Solvers 2018.0.1 Hotfix - Release Notes:
Altair MotionSolve
Resolved Issues
- Fluid responses are no longer wrong when FASTFR is used and high rank GE is present in the model.
- Fatigue results are no longer wrong when the UNIT of MATFAT is not MPa for EN fatigue.
- For S2S contact with CLEARANCE=0o0, all contacts are shown as oPEN in ocpr file (CoNTPRM,PREPRT,YES)o This is now fixed.
- Initial stress no longer errors out when ISTSADD (Initial stress bulk data, INISTRS, combination) is used.
- Programming error no longer occurs in a buckling analysis that points to a large displacement nonlinear subcase.
INTERNAL PRoGRAMMING ERRoR ***
in file "virfileoc", at location # 318.
Altair Radioss
New Features and Enhancements
- Submodel (//SUBMoDEL)
. Can be defined inside a submodel
. The model needs to be written with the same format version as the executableo Input format conversion is not available with this versiono
. only one unit system can be used
- Contact interface friction defined by set of parts (beta version)
. A new keyword (/FRICTIoN) is used to define the friction model and coefficient between a group of parts or between two partso
. This friction model can be used in several contact interface and substitutes the friction model defined in the contact interfaceo
. Several contact interface frictions can be defined in a model, but only one can be referenced by each contact interfaceo
- Contact interface /INTER/TYPE24
. New flag Irem_i2=1 flag for deactivating the slave nodes if the same contact pair (node/segment) has been defined in a TYPE2 interface
- Contact interface /INTER/TYPE25
. New flag Igap=3 to automatically scale the contact gap according percentage of element mesh size (%mesh_size) to avoid self-penetration
- Materials
. /MAT/LAW70: implementation of a new flag to use Emax values in contact stiffness calculation instead of E0 (default)
- Time history file
. /TH/BRICK: new variable groups
.. STRAIN outputs the global strain variables EPSXX, EPSYY, EPSZZ, EPSXY, EPSZX, and EPSY
.. LoCSTRN outputs the local strain variables LEPSX, LEPSY, LEPSZ, LEPSXY, LEPSYZ, and LEPSZX
- Starter output file
. output of measure direction (DIR) for concerned sensors in starter output file (0oout)
. New messages when the wrong direction value is set in the input deck
- Engine file
. New /KEREL option Tstart and Tstop to define the start and stop the Kinematic relaxation. New engine solution control option for solid elements with a negative volume
.. /NEGVOL/STOP: the computation is stopped when one solid element reaches negative volume
.. /NEGVOL/SMSTR (default): the solid element switches to small strain and the computation continues
Resolved Issues
- Submodels (//SUBMODEL)
. Several compatibility issues with submodels has been fixed (user material laws, group of elements defined by box, spring TYPE13 and TYPE45, .)
- Native H3D output (/H3D)
. Correction when H3D output was requested using a control file (*.ctl) command /H3D
. Output issue correction for the display of the fluid volumetric fraction (/H3D/ELEM/VFRAC)
. Numerical issue when /H3D/SPRING/DAM3 was requested
- Links between Lagrangian structure and Eulerian grid (/ALE/LINK)
. Correction of numerical issue in case of multi-domain application
- Initial volumetric fraction (/INIVOL)
. Numerical precision issue for the fraction initialization
- Edge to Edge contact interfaces (/INTER/TYPE11)
. Numerical issue in case of very big edge to edge contact interface
- Tied contact interfaces (/INTER/TYPE2)
. Thermal instability when slave node is linked to non-activated element
. Correction of thermal resolution in tied contact
. Numerical correction in case of Spotflag=28 and solid to solid contact
. Correction of rigid body motion for Spotflag=27 and solid to solid contact
. Improvement of AMS compatibility with Spotflag=27 formulation
- Surface to surface contact interfaces (/INTER/TYPE24)
. Numerical issue fix with SPMD version, INACTI=5 and edge to edge treatment
. Memory allocation improvements for big models
- Joints properties
. /PROP/KJOINT: numerical issue in the specific energy computation
. /PROP/KJOINT2: numerical issue in the specific energy computation
. /PROP/KJOINT2: time step was not printed in the Starter listing file
- Solid property (/PROP/SOLID)
. Computation time optimization for Ismstr=10, 12 with Hyper-elastic materials
. Accuracy improvement for Isolid=18
. Improvement of particle activation for Ndir=2 and non-defined subset
. Starter may fail with linear tetrahedron element /TETRA4 and Ismst=11 on single precision version
. Starter may fail with brick variable initialization (/INIBRI) option on single precision version
- Shell composite property
. /PROP/TYPE17: Starter output file reporting wrong interply material Id with the PlyXFem option
. /PROP/TYPE17 and /PROP/TYPE51: incorrect Ply position in Starter output file
. /PROP/TYPE17 and /PROP/TYPE51: error is printed in case element is not defined in any ply
. /PROP/TYPE51: numerical issue with only single layer and Ply position flag = 4
- Materials and failure models
. /MAT/LAW24: numerical issue fixes after crack.
. /MAT/LAW69: curve fitting issue with Single Precision version
. /MAT/LAW88: numerical issue with strain rate dependency interpolation
. /FAIL/TENSSTRAIN: wrong behavior with solids element during damage phase
. /FAIL/TAB1 and /FAIL/EMC: Lode angle computation correction (for solid only)
- Advanced Mass Scaling (AMS)
. Numerical issue with multi-processor for specific stamping application
- Time history (/TH)
. /TH/SHELL: correction of the WPLAYij output
- Finite Volume Method Airbag (/MONVOL/FVMBAG1)
. Numerical issue depending on the number of SPMD domains which caused the computation to fail
- Animation file output (/ANIM)
. /ANIM/NODA/DMAS: improvement of the output to be fully consistent with mass value
- Parameters (/PARAMETER)
. Better error message in the case of an incomplete /PARAMETER expression
- Element activation (/ACTIV)
. Tstart time option was not read for the formulation Iform=0
About Altair HyperWorks. Altair HyperWorks is the most comprehensive, open architecture CAE simulation platform in the industry, offering the best technologies to design and optimize high performance, weight efficient and innovative products. HyperWorks includes best-in-class modeling, linear and nonlinear analyses, structural and system-level optimization, fluid and multi-body dynamics simulation, electromagnetic compatibility (EMC), multiphysics analysis, model-based development, and data management solutions.
About Altair HyperWorks Solvers. HyperWorks Solvers is a collection of finite element and multibody dynamics solvers for structural, fluid-dynamics and systems simulation. These solvers can be employed for simulation driven design as well as design optimization.
With the 13.0 release, a renaming of our structural solver products has taken place in order to accommodate the growing trend of applying optimization technologies more intensively in the product development process, instead of just single run analysis. Moving forward, our structural and thermal analysis and optimization product for linear and non-linear events will be called OptiStruct; this includes analysis disciplines such as linear and non-linear statics, noise and vibrations and thermal analysis. Our product for highly-nonlinear, typically transient events such as crash, impact, forming or blast analysis will be RADIOSS. Both codes are developed with a strong focus on the above mentioned disciplines, and will continue to leverage technology mutually. OptiStruct will continue to leverage the widely used bulk data input format, and RADIOSS will continue to use the well suited block format. Moving forward, OptiStruct will also serve as the general framework for optimization involving multiple physics incl ding CFD and FSI with AcuSolve and multi-body dynamics with MotionSolve, and will also offer API to integrate additional solvers and solutions within a general multi-model framework.
About Altair. Altair is focused on the development and broad application of simulation technology to synthesize and optimize designs, processes and decisions for improved business performance. Privately held with more than 2,000 employees, Altair is headquartered in Troy, Michigan, USA and operates more than 45 offices throughout 22 countries. Today, Altair serves more than 5,000 corporate clients across broad industry segments.
Product: Altair HyperWorks Solvers
Version: 2018.0.1 Hotfix only
Supported Architectures: x64
Website Home Page : www.altair.com
Language: english
System Requirements: PC
Supported operating Systems: Windows 7even or newer
Software Prerequisites: Altair HyperWorks Solvers 2018
Size: 632.6 mb
Altair HWSolvers 2018.0.1 Hotfix
Download From UploadGig

https://uploadgig.com/file/download/bB638bFf4642E8fa/BaDshaH_taAHW.Sol1801.rar

Download From Rapidgator






Related Posts
20 hours

 Date: 11/13/18 02:30   in : Software 

Languages: English | File Size: 80.31 MBThe Ultimate Stitching Software! PCStitch is advanced, but it's perfect for any cross-stitcher. If you're looking to extend your crafting creativity, we invite you to take a look at the ultimate design software available today. Here's some of what PCSt...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

3d-Coat v4.8.27 Multilingual (x64) | 885 MB 3DCoat is the one application that has all the tools you need to take your 3D idea from a block of digital clay all the way to a production ready, fully textured organic or hard surface model. Today 3DCoat is available to learn at 240 Universities...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

VovSoft Copy Files Into Multiple Folders 2.5 | File size: 3.4 MBCopying files into multiple directories is very easy using Copy Files Into Multiple Folders. All you need to do is to choose the files and choose the target directories. Then pressing the Copy Files to Folders button starts the process...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

Autodesk Alias Products 2019.2 Update | 1.1 GbAutodesk Inc. has released an update to Alias Products 2019. This update introduces several new features, fixes, and improvements, and addresses many customer reported crashes and issues. November 5, 2018 Release Notes - Autodesk Alias 2019.2New ...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

Devious Machines Texture v1.1.34 (x64) | 674.48 MB Drawing from a library of over 300 acoustic and electronic sources, Texture synthesises new layers which track the dynamics of your sound. Want to "glue" your hi-hats transients by adding dynamic filtered noise? Or how about beefing up that...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

File size: 111 MBNew Avira Antivirus Pro - Security and simplicity redefined. The quick and easy way to protect yourself from online threats without all the hassle. From malware and Trojans to spies and identity theft, Aviras NEW Antivirus Pro gives you the protection you need to live the life you ...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

File size: 345 MBCapture One continues to lead the way in RAW file image editing. Expertise from creating customized color profiles for more than 400 cameras, combined with our relentless dedication to creative freedom has brought recognition to Capture One's workflow, our exceptional color handlin...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

File size: 60.4 MBWe're now proud to announce DC Forensics 10 This powerful Forensics software product has all of the power previous versions of DC LIVE/Forensics but with some major new features! You'll still have the best odds on the planet of pulling a voice out of the recording muck. Exp...

 

20 hours

 Date: 11/13/18 02:30   in : Software 

ScreenHunter Pro 7.0.985 Portable | File Size: 173 MBScreenHunter 7 is an award-winning solution to all-in-one image capture, print, edit and video recording. It's the total capture solution to save you time and boost productivity. Also with auto-scroll web pages, auto-capture, webcam and video scr...

 

CoolUtils Total Audio Converter 5.3.0.174 DC 13.11.2018 Multilingual | 39.3 MbTotal Audio Converter - is a unique converter that allows you to convert audio files of different extensions. Among them are MP3, WAV, RMVB, MIDI, AMR, FLAC and M4A. The program interface is quite easy and convenient . Th...